SOLAR EPRA LICESING TRAINING T2/T3
Service

SOLAR EPRA LICESING TRAINING T2/T3

1
$33.20$83.01

Are you looking to obtain the Solar EPRA License?

Unlock your pathway to success with our comprehensive EPRA exam preparation package—designed specifically for EPRA T2 and T3 candidates!

Here’s what you get when you enroll:

 Recorded Training Videos for Flexible Learning 🎬

Study at your own pace with high-quality recordings covering all EPRA- topics.

Revision PDF Questions for EPRA T2 and T3 📄

Reinforce your knowledge and track your progress with expertly crafted revision question sets.

📚 EPRA Exam Past Papers (2013 Onwards) WITH Answers

Gain confidence by practicing with actual EPRA exams from 2013 to the latest, complete with detailed solutions.

📝 Comprehensive Study Notes & Resources

All the essential notes and summaries you need for both the written and oral exams.


🤝 Exclusive 20-Minute 1-On-1 Coaching Session

After purchasing the course, you’ll receive a personalized coaching session to address your toughest questions and give you that final boost before your exam.

Don’t leave your EPRA licensing success to chance!


Prepare for your written and oral exams with the resources trusted by successful candidates.

👉 Sign up today and get instant access to past exam papers, notes, videos, and your private coaching slot.

WATCH THE CATEGORIES OF LICENSES HERE https://youtu.be/RnhmLcWD6mA


1. Define the term ‘Islanding” in relation to grid connected PV systems.

Islanding is where a portion of the utility system that contains both loads and

a generation source is isolated from the remainder of the utility system but

remains energized.

2. State and explain 5 areas where use solar PV power can be applied:

Solar photovoltaic systems can be installed on rooftops, integrated to a

building's envelope, or ground-mounted. Photovoltaic applications include

residential systems, larger industrial/commercial systems and utility-scale

power plants, but also consumer goods. A solar photovoltaic system can be

• Grid-connected residential systems

Can be rooftop, integrated in the building’s envelope (used as a building

component for insulation, roofing tile, shading, etc.) or mounted directly

on the ground (in the garden). Connection to the local electricity network

allows any excess power produced to feed the electricity grid and to sell it

to the utility. Electricity is imported from the network when there is no sun

• Grid-connected power plants

Can be ground-mounted, or located on large industrial/commercial

buildings such as shopping malls, airport terminals or railways stations.

These produce a large quantity of PV electricity at a single point, and make

use of already available space providing a part of the electricity needed by

these energy-intensive consumers (in the case of industrial/commercial

buildings)

• Off-grid systems for rural electrification

Can be a small solar PV system covering the basic electricity needs of a

household, or a larger solar mini-plant, providing enough power for

several homes. These systems bring access to electricity to remote areas

(mountain huts, developing countries, small islands). More information is

available at www.ruralelec.org

• Off-grid industrial applications

Very frequent in the telecommunications and transport fields: Repeater

stations for mobile phones, traffic signals, marine navigation aids, security

phones, remote lighting, highway signs, etc. These bring cost-effective

power in areas far away from the electricity grid, avoiding the high cost of

installing cabled networks

• Consumer goods

Many everyday electrical appliances use PV cells: watches, calculators,

toys, battery chargers, water sprinklers, lighting, etc.

3. Briefly explain how a solar cell works?

A solar cell is a semiconductor diode that when stimulated with light,

produces an electron and a positive charge on opposite sides of the cell.

Wires collect the charge off each side of the cell and take this electricity to

the load circuit, such as a light bulb. Wiring cells in series increases the

voltage, and in parallel increases the current output. For the cells to be

useful, they must be put together in a system with other components,

called a "solar energy system," or a "solar electric system."

4. Describe the three types of solar panels listed below:

a) Monocrystalline solar cells

These are made from thin wafers of silicon, sliced from large crystals that have

been grown under carefully controlled conditions. Typically, the cells are a few

inches across, and a number of cells are laid out in a grid to create a panel.

Relative to the other types of cells, they have a high efficiency, meaning you will

obtain more electricity from a given area of panel. This is useful if you only have

a limited area for mounting your panels, or want to keep the installation small

for aesthetic reasons. However, growing large crystals of silicon is a difficult and

very energy-intensive process, so the production costs for this type of panel have

historically been very high. Production methods have improved though, and

prices have fallen a great deal over the years, partly driven by competition as

other types of panel have been produced.

b) Polycrystalline solar cells

It is cheaper to produce silicon wafers in polycrystalline form, as the conditions

for growth do not need to be as tightly controlled. In this form, a number of

interlocking silicon crystals grow together. Panels based on these cells are

cheaper per unit area than monocrystalline panels - but they are also less

efficient. In terms of pounds-per-watt, there is not a great deal of difference

between the panels.

c) Amorphous Solar Panels

The newest type of panel is based on amorphous silicon. Here, the silicon atoms

are not ordered in a crystal lattice at all. The production methods are quite

different - instead of growing crystals, the silicon is deposited in a very thin layer

on to a backing substrate. Sometimes several layers of silicon, doped in slightly

different ways to respond to different wavelengths of light, are laid on top of one

another to improve the efficiency. The production methods are complex, but less

Frequently bought together

© 2026 TORCHBEARER INSTITUTE OF TECHNOLOGY. All Rights Reserved.

Powered By