Electrokristron Inverter Battery Interface Module - EIBIM

Electrokristron Inverter Battery Interface Module (EIBIM) is an addon or optional support product for your Automatic Transfer Switch (also known as ATS or Automatic Changeover, ACS). The EIBIM monitors the operation of your installed running Inverter such that when the Inverter's battery voltage gets low, the EIBIM signals your ATS to automatically START the generator. See video below.

EIBIM Demonstration video

EIBIM's Quick Features:

1. It continuously monitors Inverter battery voltage level during Inverter's usage and sends a GenStart command to the ATS when battery voltage gets low or reaches a predetermined threshold.
2. When battery has charged for a predetermined duration, the EIBIM then sends a GenStop signal to the ATS, which thereafter stops the Generator.
3. Upper and lower battery voltage thresholds easily adjustable using dedicated digital control buttons
4. Digital display to view both preset threshold and actual battery voltages
5. Easy to install, adjust and use.
6. High/Low threshold voltages adjustable from 1.5V DC to 100V DC
7. Compatible with any single or multiple batteries (Battery bank) up to 100V DC.
8. Comes with digital duration Timer adjustable from 0,1 Sec to 99 Hour (Set Gen duration for battery charging operation)
9. Gen Timer automatically starts counting when EIBIM gets triggered (Gen starts) owing to Inverter low battery condition
10. Gen automatically stops and Inverter resumes backup operation when preset Gen Timer set duration elapses