Higher-X Online

Electrokristron Automatic Transfer Switch unit (also known as ATS or Automatic Changeover switch ) helps you automate your power transfers between different sources as well as manage your generator's fuel consumption and durability.ATS Quick Features:1. Automatic power transfer to loads or building from available power source such as Mains, Generator, Inverter etc2. Automatically starts or stops your Generator when public Mains fails or returns respectively3. Optional features can be added based on customer's request such as Generator Schedule Timing, ability to start Gen when Inverter battery voltage gets low, wireless remote control, etc.

Electrokristron Inverter Battery Interface Module (EIBIM) is an addon or optional support product for your Automatic Transfer Switch (also known as ATS or Automatic Changeover, ACS). The EIBIM monitors the operation of your installed running Inverter such that when the Inverter's battery voltage gets low, the EIBIM signals your ATS to automatically START the generator. See video below.EIBIM Demonstration videoEIBIM's Quick Features:It continuously monitors Inverter battery voltage level during Inverter's usage and sends a GenStart command to the ATS when battery voltage gets low or reaches a predetermined threshold.When battery has charged for a predetermined duration, the EIBIM then sends a GenStop signal to the ATS, which thereafter stops the Generator.Upper and lower battery voltage thresholds easily adjustable using dedicated digital control buttonsDigital display to view both preset threshold and actual battery voltagesEasy to install, adjust and use.High/Low threshold voltages adjustable from 1.5V DC to 100V DCCompatible with any single or multiple batteries (Battery bank) up to 100V DC.Comes with digital duration Timer adjustable from 0,1 Sec to 99 Hour (Set Gen duration for battery charging operation)Gen Timer automatically starts counting when EIBIM gets triggered (Gen starts) owing to Inverter low battery conditionGen automatically stops and Inverter resumes backup operation when preset Gen Timer set duration elapses

Electrokriston Generator Wireless Ignition Control (GWIC, pronounced "GeeWic") is an addon product for use with your Automatic Transfer Switch (Also known ATS or Automatic Changeover Switch).It enables your Generator to be wirelessly controlled either automatically through the ATS or directly by you through a remote control switch in your hand.GWIC Quick Features:1. Portable control box2. Radio Frequency (RF) based signals3. Comes with 2 handheld/key-holder RF remote control units

Electrokristron Automatic Phase Selector Switch (Also known as APS or Automatic Mains Cutout Changer) is your ideal automation panel for automatically switching Mains load from one phase to another. When the loaded phase fails, the APS checks if other phases are available and automatically transfers the load to another live phase.APS Quick Features:1. 3-Phases in,1-Phase out2. Auto/Manual phase selection based on user setting3. Under voltage and over voltage protection (AC 170V-250V operating range)